Shop Talk Live - Fine Woodworking

This episode of Shop Talk Live is sponsored by Audible. Head over to Audible.com/ShopTalkLive to get a free audio book. 04:50 - Question 1:  I have a 400/1000 grit combination diamond stone, a high quality honing guide, and a leather strop. People always talk about removing the burr on the back of the blade after sharpening. I try to do that, but it seems to just bend back around and doesn't come off. I end up with a tiny sliver of iron on the end of my blade which is not straight and that I can bend with my finger. Why is this happening, what am I doing wrong? -Theo   11:00 - Question 2: Is there a maximum board width you are comfortable gluing up for a table top? I've heard that wider boards that are ripped down somewhat are more stable in the long run. I'm using some hickory for my top, and the boards will be around 10" wide following stock prep. I'd prefer not to rip them down. -Eric 16:45 - All Time Favorite Tool of All Time... for this week: Mike - Clamping cauls Mike Pekovich: Arts and Crafts on Displ