Shop Talk Live - Fine Woodworking

To enter to win Bob Van Dyke's sharpening box from issue #254: Leave a comment on this episode's show-notes page Head over to the Connecticut Valley School of Woodworking site and sign up for their email list We’ll pick a winner December 21, 2018. Question 1: From Amy: I've been using a piece of vegetable tanned leather with green waxy honing compound as a strop. I start by rubbing compound onto the shiny side of the leather. However, when I go to strop my carving knives, the pressure from my blade compresses the compound and it flakes off. Is there something wrong with my compound, or am I doing something wrong? Question 2: From Matt: I have some 10-in. wide 8/4 African Mahogany that I have been resawing into thinner boards.  I start by jointing one face then one edge and then resawing, usually down the middle. There is a good amount of tension in the boards, so after resawing they have a decent twist.  Do I need to let the boards re-acclimate before I re-joint and plane them, or can I do that immediately