Rowingchat

A visual reference to aide adjustments to blade depth. Timestamps 00:45 Low technology solutions for rowing too deep. The tape goes around the oar shaft so that when the oar is under the water at the correct depth and the handle is at the correct height for you to old. Mark exactly where the shaft is level with the water surface. You can do this where the oar shaft is wet if you do this carefully. Measure the spot, return the oars to land and transfer that measurement to all the other oars and put white tape on them too. While rowing you can look sideways at your oar to see if the white tape is going under the water and where in the stroke it goes too deep (and you can no longer see the tape). 03.30 Causes of rowing too deep Usually it's caused by the athlete holding the handle too high. Modern oar designs naturally sit at the correct depth. If you row 'over the barrel' the path of the handle is too high mid-stroke (and usually too low at the finish so your oar spoon washes out). The water is flat and so the