Pepperl+fuchs Podcasts

AS-Interface parameter bits -- This week Tim explains what AS-Interface parameter bits are. Using AS-Interface parameter bits users can configure AS-Interface modules to perform certain operations.  Users should know that the default operation of the modules have been selected to cover nearly all cases and modifying the parameter bits is only needed in rare cases.  By default the parameter bits are "1" or "ON".  Tim also explains the difference between 'parameters' and 'power-up parameters'.  Users should know that: --Parameter bits are not stored on the module --While the hand-held can change a parameter bit, disconnecting the module will always reset them to "1" --The PLC can be instructed to send parameter bits during startup or even during normal operation --Parameter bits can be set through the display on the gateway --ControlTools software is another way of setting parameter bits